Unitized Transportable Substation is used for feeding power from high voltage to low voltage in open cast mines, construction sites, metro cities, etc. The substation is compact in size, suitable for frequent shifting and for use in outdoor locations. The substation is installed and mounted on skid frame or wheels or channels and is provided with lifting hooks.
The unitized substation comprises the following main components.
- Vacuum Circuit Breaker panel in outdoor enclosure up to 11KV, 33KV complete with CT, PT, Relay & Instrument chamber. The outdoor panel is directly coupled with HT Flange of the transformer with copper busbars. The incoming of the HT Panel is provided either with Plug Socket or Cable box. Alternatively Load Break Switch or a Ring Main Unit can also be coupled with the HT bushing of the transformer.
- Outdoor type Cast Resin / Dry type Transformer up to 2000KVA 11KV-6.6KV-33KV/415V,DYn11, and with off-circuit tap links and standard fittings as per IS/IEC standards. The transformer has HT Flange with bushings to be coupled directly with the outgoing of the HT Panel and LT flange with the incoming of LT Panel. The transformer can be either Dry type Resin Cast or Dry type with Nomex insulation. With Dry type transformer the total unit is housed in a single outdoor type enclosure in place of three separate enclosures.
- LT Panel is outdoor type comprising of one or more air circuit breaker or MCCB either in single or board formation suitable for a System Voltage of 415V,3-Phase 50 C/S. Incoming of LT Panel is directly coupled with the LT flange of the transformer. The output is either Cable box or Plug & Socket arrangement for feeding power to LT equipment.