Products   

Cast Resin Transformers

TECHNICAL FEATURES :

Manufacturing standards:
The transformers are built in accordance with IS 11171 and IEC 726 standards.

Core :
The core is built of cold rolled oriented grain steel with low specific losses, insulated on both sides by a thin inorganic coating (Carlyte). The sheets composing the core are cut at 45 degrees. Uniform pressing, stiffnes and solidity of the columns assure a low noise level.

High voltage windings :
The high voltage windings are made of electrolytic COPPER SUPER ENAMELLED F/H CLASS conductors (wire or foil strip depending upon power and voltage requirements). It is possible to produce Aluminium windings. The windings are inglobed under vacuum in class F/H epoxidic resin depending on requirement. The accurancy of execution of these processes allows the obtainement of windings free from partial discharges.

Low voltage windings :
The low voltage windings are made of strip or foil (copper or alluminium conductor depending upon power and voltage requirements). Class H insulating material is used.

Standard Accessories :

  • Rating and diagram plate
  • Earthing terminal
  • Skid under base or truck with bidirectional wheels
  • Primary Terminal
  • Secondary terminal lifting lugs.
  • Enclosure with IP 21,23 or other protection class
  • Temperature monitoring unit with display.

Optional Accessories :

  • Over current relay
  • forced ventilation system.

Test:
All transformers are singly tested with routine test, according to standard IEC 726/ IS 2026 / IS 11171. Upon request the following type test can be carried out on customers request :
# Temperature rise test
# Full wave impulse test

Special test: short circuit test.

Technical Data :

Standard Applicable : IS 2026, IS 11171, IEC 726
TYPE : Open / Enclosed
Temperature Class : 155/140/120 °C
Insulation class : H / F /B

More Techanical Specification >>


1000KVA Cast Resin Transformer



500 KVA, 10.5/0.425 KV Cast Resin
Static Excitation Transformer


2000 KVA 11/0.433 KV
Cast Resin Transformer


1250KVA Cast Resin Transformer


630 KVA,11000/433 Volt Cast Resin
distribution Transformer


400 KVA, 6600/433 Volt Cast Resin
distribution Transformer


500 KVA,10500/425 Volt Cast Resin
Static Excitation Transformer



400 KVA,11000/400 Volt Cast Resin
Out door distribution Transformer



250 KVA, 6300/440 Volt Cast Resin
Transformer



home | about us | products | quality | techanical data | contact | feedback ^ Top